1. 500ml Wash N Shine Shampoo
2. 500ml Marine A Glaze Surface Preparation
3. 2 x 110ml Marine + Active Sealant
4. 2 packs of application cloths
5. Full set of instructions

A Glaze Preparation is applied before the boat is glazed to remove any stubborn stains. A Glaze prep is a medium compound also. Available in 500ml bottles - A Glaze prep needs to be applied by hand or buffer if you have a buffer machine.

If you just wish to remove stains from your vessel. A Glaze Preparation can be used.

A Glaze Plus active marine sealant is available in 110ml. It is custom blended for GRP, conventional, clear coat and water based finished plus stainless steel and chrome. A Glaze sealant forms a protective barrier around the vessel reducing black streak marks, stains from bird lime, industrial fallout, sap and general day to day pollutants. Sealant can be ordered individually only if the boat has been previously glazed otherwise we can offer no warranty on the glaze.

Wash 'N' Shine is a cleaner which is compatible with the A Glaze prep and sealant. Wash 'N' Shine has been specially formulated to clean painted surfaces and GRP. Unlike washing up liquid, Wash ‘N’ Shine has been specially formulated to clean painted surfaces and GRP without damaging the pigment structure in the colour and ‘dulling’ it over a period of time.

Wash 'N' Shine can be used all year round to maintain your boat. 50ml of A Glaze Wash 'N' Shine needs to be diluted in 5 litres of warm water and can be applied with a sponge or soft cloth. Wash 'N' Shine Shampoo is also available in 5 litres.

A Pre-Cut for the removal of fine surface scratches, holograms and restoration of dull, faded finishes. Can be used with a polishing machine (max 1800 rpm) or by hand. Apply wax to the finish or A Glaze Surface Sealant to protect the polished surface. (Available in 1 litre)

This product has been specially formulated for us by Teak specialists. This new system can be used on any teak decking or furniture. Grey, dull areas can now be transformed back to its original form when new. It can keep your decks looking great during the boating season.

Launched at the London Boat show 2008, Active 3 is available as 500ml and enables marks to be removed from the vessel leaving a shine on the GRP or painted surface. This shine gives minimum protection for approximately 4 weeks and is ideal for any customers who want a quick shine on their boat. Active 3 can also be used on boats which have already been glazed as it simply enhances the shine A Glaze provides. This is a new spray and wipe formula and the purpose of Active 3 is to remove stubborn baked on marks and stains which are sometimes left between visits to the vessel. It is an excellent product for removing bird lime when left for periods of time. Click here for detail

We have recently introduced a new kit for jet skis, speedboats, outboards and surf boards. The jet ski kit contains 55ml A Glaze Sealant, 120ml A Glaze prep, 3 application cloths and full instructions. As water hits the surface of the board/ski it immediately runs off enabling increased performance. (The Jet Ski Kit will "glaze" boats up to 20ft long)

The all new eradicator sponge. Contains melamine fibres. Add a small amount of water to the sponge and rub over the stain/mark. Eradicators do not harm the GRP or painted surface of your vessel.

1. Black streak marks
2. Scuff marks
3. Bird acid
4. Tree sap
5. Biro on leather
6. Marks on cabin walls
7. Dirt on seating areas
8. Marks suffered from diesel
9. Some stains on carpets
10. Light rust marks

A Glaze Crystal Vision glass sealant is a revolutionary cleaner for windscreens and windows on the vessel. Applied like a regular glass cleaner, Crystal Vision not only cleans the glass but also seals it. As Crystal Vision is a hydrophobic product it stops rain spots and salt water spots from forming on the glass. Crystal Vision need only be applied once a year. As it bonds to the glass it also enables bird acid and general pollutants to be cleaned from the glass more easily than before.

Crystal Vision can also be applied to polycarbonate. Crystal Vision can either be sprayed or wiped over the glass or polycarbonate. It can also be applied to shower screens on the vessel to reduce water staining. Click here for detail

A Glaze Fabric Protector keeps the look and feel of your seating area and carpets showroom new. Our formula creates a powerful, undetectable shield of protection for all types of marine fabrics, while preserving the original look and feel. Most water and oil based spills are easily wiped away without leaving a stain. To use fabric protector on your canopies, just simply spray on and leave.

This transparent protective coating helps prevent fading, cracking and discolouration. Mildew and deterioration are also controlled. Vinyl & Leather protector completely seals the pores whilst letting them breathe, helping the vinyl stay softer, smoother and looking new.

Apply to dinghies or ribs, A Glaze dinghy Sealants helps reduce staining. Dinghy Sealant is a recommended product from Avon Inflatables. Dinghy sealant can also be used on new fenders to seal them and reduce stubborn stains. Use in conjunction with our fender restorer for older white fenders. Dinghy Sealant is simply sprayed on the fender and wiped over with a clean soft cloth.

Used in the same way as our marine sealant kits, the A Glaze + Active small craft Kit can be placed on the body work and the hull of the boat or the bottom of the jet ski to reduce growth from marine life. (This kit will glaze up to a 20ft boat)

A heavy duty cleaner to be used on the hull of the vessel or on stubborn marks on walk ways. This hull cleaner is ideal for yellow marks around the waterline. Our applicators have also found it works well on Hyperlon on ribs or dinghies to remove stubborn stains. Can also be used on stubborn tree sap marks and bird acid.

Practical Boat Owner recommends Hull Cleaner to remove rust stains as well as marks on the Hull. It is applied by either wiping on the stained area or using a cheap paint brush to 'paint' on the hull. It is then simply left for 5-10 minutes and hosed off.

This kit contains all the necessary product for year round maintenance of your vessel once "A Glaze" has been applied. The After Care Pack comes in a convenient holdall enabling all of the cleaning products to be stored together.

It contains: 500ml surface preparation, 500ml wash n shine shampoo, 500ml fabric protector, 110ml vinyl & leather protector, 250ml crystal vision, pack of soft cloths, pack of microfibre cloths, microfibre leather and a sponge.

We have a wide range of application cloths mostly Micro Fibre cloths. Micro Fibre cloths are unique as they 'hold' the dirt and grime on the cloth and do not smear it around the GRP or painted surface. Our Micro Fibre cloths are guaranteed for up to 500 wash cycles so can be used over and over again.

Removes black marks from white fenders using our fender restorer and seals the fender using our dinghy sealant to reduce staining. Our Fender Restorer will clean 90% of marks on a white fender and using our Dinghy Sealant afterwards enables the fender to be sealed thus staying cleaner for longer periods of time.

Please note when buying the kit, do not use the fender restorer over painted surfaces or over signwriting as it will remove it.

Includes Wash N Shine 1 litre shampoo and 500ml active 3 to clean the boat and add a short term shine to the surface with minimal protection. Ideal for those boaters who prefer not to glaze their boat.

One shot aerosol deodoriser and sanitiser. A Glaze Air Purifier contains a chemical deodoriser that is effective against a wide variety of chemical odours including diesel. This deodoriser leaves a harmless microcrystalline deposit that continues to work long after the spray has been applied. A Glaze Air Purifier also contains a powerful disinfectant that is effective against bacteria, fungi, moulds, yeasts and viruses. This helps remove the source of odours caused by biological degradation often found in enclosed spaces and again protects long after the spray has been applied. Use inside the boat generally, in the heads or even in the engine room. When treating inside the boat try removing the bilge covers to allow activity into the bilge.

PVC window restorer enables canopy windows to remain pristine. For old windows, it will bring them up as new.

Simply rub over the PVC and buff in until the restorer disappears - you will notice the difference instantly.

This product is used for cleaning all walkway surfaces such as diamond pattern deck mouldings. Deck Cleaner is a very highly concentrated cleaner for use through a pressure washer or manually - 1 part deck cleaner to 1 part clean water making up to a litre per bottle.

This product is for use with the Eradicator Cleaning Sponge lubricating the movement of the sponge allowing the fibres of the sponge to operate as efficiently as is possible.

Restores all metals to natural brilliance. Recommended to use with Aluminium, Chrome and Stainless Steel polish as a sealant after restoration - Astounding results.

Cleans and polishes to natural brilliance leaving a long lasting shine and protection.

Contains: 500ml A Glaze Silver Spray and 500ml Fabric Protector.

Introduced to combat mildew growth on canopies. Firstly the silver spray is sprayed onto the canopy once the canopy is cleaned - this prevents mildew and bacteria growth. Once dry, the fabric protector can be used to re seal the canopy making it water repellant.

Contains 500ml Nano lubricant and a pack of 4 eradicator sponges.

Used for the removal of stubborn stains on GRP, vinyl seating, bird lime, scuff marks, rope marks and general black streak marks. Simply spray the Nano lubricant on the area to be cleaned and then use the sponge to erase the mark. The eradicator does not remove any glaze sealant.

Contains a leather re-conditioner, cleaner and sealant to fully condition any leather seating.

Soft leather flunkie for wiping down the vessel after washing.

To be used inconjunction with our Teak Care Kit. To enable the teak to remain pristine for up to two seasons, apply the sealer once you have applied process 2 of our Teak Care Kit. Teak Sealer is available as a quart.

This product is available in 500ml and is used in conjunction with the fabric protector to seal your canopy and stop mildew growth and bacteria from forming on the canopy. This product can also be used on any flat surfaces where bacteria grows without the use of the fabric protector. Guaranteed to last in excess of 12 months.

This pack has been put together to ease the everyday maintenace of your vessel. It includes hull cleaner 1 litre, Active 3 500ml, 1 eradicator pack, nano lubricant 500l and a deck cleaner 500ml.

Ideal for those boaters who do not want to glaze their boat but just want a short term solution. Can be used on glazed boats also.

To ease the mundane job of cleaning windows and keeping them clean. Our glass kit can be used not only on glass but also on acrylic so is ideal for hatches(not walkways, windows and doors. It cleans the glass and seals it ensuring they remain pristine. The PVC restorer can be used on canopy pvc windows to restore them to a 'new' condition. Contains: 1 eradicator pack, 500ml nano lubricant, crystal vision version 2 250ml, pvc restorer 110ml.

This pack is ideal for boats with lots of stainless steel and metal. It can restore the oxidised metal and seal it so it looks like new. Contains 250ml metal restorer and 250ml metal polish.

Ideal for cleaning and maintaining hyperlon dinghies and ribs. Contains 1 pack of eradicator sponges, 500ml nano lubricant, 500ml dinghy sealant, 1 litre wash n shine shampoo and an active 3 500ml.